CLIENT ACCESS/400 FOR WINDOWS 3.1, WINDOWS 95/NT CD-ROM
--------------------------------------------------------------------------

This CD-ROM contains the Client Access/400 programs and files
for the DOS, Windows 3.1 and, Windows 95/NT clients.
The installation publications are shipped as part of the initial AS/400 software
order.  Refer to the publications listed at the end of each set
of instructions and the online help text if you need additional
information to complete the client installation.

Installation diskette images for each client are included in the DISKIMGS
directory. Refer to the instructions later in this document on how to create
install diskettes.


-------------------------------------------------------------------------
To Install the Windows 3.1 client:
-------------------------------------------------------------------------
1. Start Microsoft Windows program.

2. Select Run from the Windows File pulldown menu.

3. For SBCS, type d:WIN16.EXE

   For DBCS, type d:WIN16D.EXE

   where d: is assigned to the CD-ROM drive

   Refer to the following publications for detailed installation instructions:

   Client Access Enhanced for Windows 3.1 Setup, SC41-5534



--------------------------------------------------------------------------
To Install the Windows 95/NT client:
--------------------------------------------------------------------------
NOTE: Read the README.TXT file in the WIN95NT directory before
installing Client Access/400 for Windows 95/NT.  This file
contains important last minute changes that were not finished in
time to be included in the printed manuals.

1. Start Microsoft Windows 95/NT program.

2. Select Run from the START menu.

3. Type d:\WIN95NT\SETUP.EXE, where d: is assigned to the CD-ROM drive

   Refer to the following publications for detailed installation instructions

      Client Access for Windows 95/NT Setup, SC41-3512

--------------------------------------------------------------------------
To Create Install Diskettes:
--------------------------------------------------------------------------

1. From a DOS screen, change the DOS prompt to the CD-ROM drive
   and enter the command to create the following installation diskettes.

   MAKEXK1       for Windows 3.1
   MAKEXD1       for Windows 95/NT
      
The following is a list of messages that may be issued while creating
installation diskettes:

IDENTIFIER  TEXT
==========  ==========
CRT001      This program must be started from your CD-ROM drive.

CRT002      A problem occurred while creating the installation
            diskettes. Please refer to the README.TXT file
            located in the README directory for additional
            help.

CRT003      Label a blank diskette "xxx Diskette n"
            and insert it into your diskette drive.

            where xxx is the name of the client you are creating and
            n is the diskette number.

CRT004      You will need n blank diskettes to create xxx installation
            diskettes.

            where n is a number and xxx is the name of the client
            you are creating.

CRT005      Now creating xxx Diskette n

            where xxx is the name of the client you are creating and
            n is the number of the diskette.

CRT006      Please remove the diskette from the diskette drive
